Necklace design from the Atlantis ring

Atlantis necklaces by MeriTomasa: in sterling silver or in three metals: gold, silver and copper.

Measurements of the Atlantis necklace from The MeriTomasa's Treasures Factory. Side view.

Measurements of the Atlantis necklace from The MeriTomasa's Treasures Factory. Frontal view.

What makes the Atlantis Ring unique is that it brings together in a small device a good part of the guidelines of sacred geometry, and especially that the entire design of the ring is based on the golden section or Phi number, along with it is built with precious metals that balance each other. Moving all that mathematical architecture from the circle of a ring to the oval or the rectangle of a necklace is simply not possible. And it is not my intention :)

My intention is not to make an Atlantis Necklace that responds to the sacred geometry and the golden section with the perfection in which the Atlantis Ring does. What my Atlantis Necklace does offer you are the most characteristic elements of the Atlantis Ring adapted to the shape of a necklace : the Luxor waveform with its little hole in the middle, followed by the six pyramids and concluded in the two isosceles triangles, with two holes at the end. And on the obverse, an engraving from the seriation of the infinity symbol, the Lemniscata.

Designing my jewelry at The MeriTomasa's Treasures Factory always poses small challenges to solve every detail. In this case:

• I wanted to wrap the characteristic elements of the Atlantis Ring in an oval to offer you a different proposal from the ones I have seen on the Internet. A more organic proposal, based on the contrast between the Atlantean geometry and the sensuality of the oval that contains it. I like this fusion between the refined intellectuality of the golden ratio and the almond sensuality that contains it. Other times, instead, I like to imagine that my proposal is an Atlantean vessel sailing the Nile towards Memphis, the capital of the Egyptian Empire.
• My intuition has brought me here, and I like the 3D effect of the darkened silver in the background that enhances the elements of the Atlante and is framed by a small polished edge..
• On the reverse side, the game is backwards: polished finish with Lemniscata infinities engraved darkened.
• I offer it in two finishes. With silver chain or cotton cord:
  • The chain is 46cm long, with a ring to shorten it to 42cm in case you want to look shorter. They are a little longer than usual because I like that the necklace is not too tight to the neck.
  • I have chosen cotton cord because, although its durability is less, it seemed more appropriate for this treasure: it is more natural, less synthetic than, for example, nylon, and at the same time it has a less rigid fall. Comes with sliding knots so you can adjust it.
• The pendant comes centered and fixed: You cannot change the chain because I did not want to put a ring and a counter ring on it. I have given it a lot of thought and this solution is fantastic if you want to change the chain, but in this case the objective is not that you have a removable piece, but what I want to offer you is that it is perfectly centered, and for that nothing like eliminate that accessory counter-ring. (If you insist that I include it, contact me).

I am neither a magician nor a priestess. I am a jeweler. That is why on my website I speak little about the benefits and uses of Atlantis. My mission is not to explain how it is activated or how to use it as an amulet or as an energy channeler. My mission as a jeweler is to offer you a top-quality Atlante collection both in relation to the precious metals that make it up and in relation to the design, manufacturing and finishing process.

Why buy it at MeriTomasa?

No tricks or baths! If you have taken a look on the Internet, it is very possible that you have found cheaper Atlantis: you may have seen pieces manufactured in series in distant countries, sometimes with other metals, such as stainless steel or copper, or finished with a bath.

The main difference of my Atlantis collection with respect to serial productions that you can find on other websites is the quality and the artisan manufacturing. I only work with noble metals (silver and sterling gold, and in the Atlanteans also with electrolytic copper). And I make each piece by hand. The result is a unique and quality treasure. Stronger and more durable.

Atlantis FAQ

How long does it take to make it and send it to me?

I make my Atlantis one by one in my workshop and I have no stock. I need between 7 and 10 days to make your ring and between 1 and 3 days of shipping (Spain). For international shipments it could be a little more.

Are you in a hurry and need it before? Write me and I organize to elaborate it and send it to you as soon as possible.

If I don't like it, can I make a return?

No. I work out of stock and I elaborate each one of my Atlantis on request, customizing materials tailored to each order you make, so that I cannot offer the return option (unless there is a manufacturing error of the jewel by MeriTomasa).

Why don't I seal my Atlanteans?

All the jewels that leave The MeriTomasa's Treasures Factory are sealed with my logo. All but my Atlante collection... But why?

• For technical reasons: the Atlantis is an artifact calculated to the millimeter, where the different figures and proportions are articulated forming a complex algorithm that I do not want to alter with my punch, nor is it placing it in the most discreet corner.
• For artisan humility, and because I want to offer you my gift and offer it to the universe. It sounds a little hippie, but I feel it like that. Creating pieces of jewelry is my gift as an artisan, and that gift that has been given to me and allows me to live as a jeweler, I want to return to the world with humility and love for my craft. I sign all my treasures, with the exception of my Atlantis, and that exception is my way of thanking and being humble, and of returning to the universe how much it has been given to me as a craftswoman of precious metals and magic tools.

About MeriTomasa's Treasures Factory and my Atlantis Collection

The MeriTomasa's Treasures Factory is specialized in custom made jewelry for all tastes and budgets: wedding rings, headbands, earrings, pendants, brooches, bracelets, rings, tiaras... My value proposition is to create quality jewelry, designed and manufactured by hand, with a focus on personalization. That is why I join campaigns like Fashion Revolution or I amb proud of being accredited with the craft product (D'A) distinctive, which certifies that my jewelry is of own production and they are made by hand using the processes of my trade and produced in my workshop in Manresa, kilometer zero. I offer a more intimate, romantic, exclusive and quality jewelry.

Like all my pieces, my Atlantis Rings collection is designed and made in my workshop in Manresa, near Barcelona, from custom jewelry orders since 2006, so you can boast of wearing a zero kilometer jewel of artisanal manufacturing.

Each ring is handcrafted, with which none of my rings is perfect in each and every one of its proportions: all have a "defect" of tenths of a millimeter here or there, the result of human imperfections and the warmth of the artisan's hand, just as surely had to be imperfect the Atlantis made by the goldsmiths of antiquity.

And if you like it but would prefer it with some changes... please tell me and we will talk about it :)